fbpx
септември 15, 2022
3 perc olvasási idő
Ádám Kis

A complete structural parametric design workflow of a slide support structure

We present one of the projects for the Steel Lion Award, which won this year’s Pangolin Award. In this article you can read a detailed case study from the Tiszaliget Revitalization project.

Project general data

The main task of the structural engineers was to carry out the design of a support structure for a new slide track. This was prescribed by the architectural design to have slightly different slopes and curvatures than the existing ones which have been considered obsolete. The goal was to reuse as many of the existing columns as possible and to optimize the positioning of support placement, therefore minimizing the number of required cantilevers.

The design team handled the global structural calculations, as well as the joint calculations, detailing, and drafting. The main purpose even at the very beginning was to create a centralized parametric model in order to dynamically generate all the necessary model objects and communicate efficiently between the softwares. From the structural point of view, this meant the full model with complex geometry, loads, supports, etc. While from the detailing side a completed model with definitive joints.

The general workflow of the project

The versatile Grasshopper script

The script is capable to carry out the following tasks:

0. Input data processing

  1. Structural model parameter collecting
  2. Load definition according to the prescriptions (manufacturer, codes)
  3. Geometry creation via Grasshopper
  4. Tekla model generation
  5. Consteel model object generation
  6. Load assignment to Consteel beams

Input data processing

Two main input data were received: A 3D model of the assembled slide elements, and a geodetic survey of the existing structure. Both .dwg files were processed in Rhino 3D to prepare the centralized model which is directly linked to a Grasshopper script. The base model which contained the slide centrelines was distributed to separate layers and loaded into Grasshopper via the Elefront plugin, as well as the measured points of the existing columns. Using these points the centrelines of the columns were averaged.

Input data in Rhino

Load evaluation

The slide manufacturers’ data sheet and the related load evaluation methods from the standard were imported to Grasshopper. This allowed us to calculate automatically the particular user, water, centrifugal, and snow loads for the given slide sections and to directly forward the results to the Pangolin plugin.

Calculation methods from the standard
Automatically generated user and centrifugal forces with eccentricities

Producing the Consteel model

After a quick correction of the centrelines in Grasshopper, a preliminary Tekla model was created by the script in order to create rudimentary joint configurations using custom components and scatter through the model in every position. This model ensured that the correct eccentricities could be calculated in Consteel at the slide receiving joints due to the real centrelines of the supporting beams.

The generated model contained all the necessary model objects (e.g. all the beams with specific releases, load cases & combinations, etc.) to directly run and analyze the model from Grasshopper, which made it possible to check different support placements in a relatively short time.

The Consteel model with all the necessary data to perform the analysis

The final model

After the structural verification and dimensioning process the verification of typified joint models (using IDEA StatiCa) for specific positions was also performed, e.g. for cantilever end node, bracing nodes, and slide receiving plates. The preliminary custom components were updated in Tekla Structures, thus creating the complete model which is ready to prepare the drawings was a matter of hours.

Conclusion

The parametric model was capable to generate multiple configurations and to assist throughout the whole project. The project’s total design duration was 2 months and was carried out by one structural engineer and one detailer. The script development lasted about 1 month and it is fully reusable for similar future projects.

PROJECT FACTS 

General Designer:  Eleven Ltd.

Steel Designer: KÉSZ Constructii Romania Ltd.

Steel design team: 1 lead structural engineer, 1 structural engineer, 1 modeller

A szerző

Ádám Kis

As a Structural Engineer he was obsessed with parametric design methods. He is convinced that it can be efficient for any design task. This is how he came to the dark side and works as a developer on Pangolin. As a PhD student, he researches the implementation of simulation methods in Consteel.

Vissza a Blogra

Egyszerűsítsd a tervezési folyamatod a Consteel segítségével

Consteel 18: executive summary of the new developments

Join the FALCON beta testing

Advanced modeling and structural analysis of photovoltaic tracking systems