fbpx
LT
Log in

Design of cold-formed structures in Consteel according to Eurocode

Cold-formed sections are commonly used as secondary structural members in modern steel – and, in some cases, reinforced concrete – industrial structures. However, their role can extend far beyond secondary framing: they can also contribute to the overall stability of the primary structure by providing resistance against lateral loads. In some applications, the entire load-bearing structure can even be designed using cold-formed sections.

Due to their slenderness and thin-walled nature, cold-formed members are susceptible to several distinct stability phenomena. Their design therefore requires a different approach from that used for more traditional welded or hot-rolled sections, with particular attention to local, distortional, and global buckling, as well as their interaction.

Registration
Details

WHAT WILL YOU LEARN?

The training begins with a review of the different stability phenomena that typically influence the strength of cold-formed sections, including local and distortional buckling, as well as relevant member buckling modes such as flexural, torsional, and lateral-torsional buckling.
The Eurocode approach to cross-section resistance is based on effective cross-sections, while member resistance is determined using buckling curves related to member slenderness. Alternative approaches to the effective cross-section method also exist. Although these methods are not currently included in the Eurocode, they are successfully used in international practice. The most widely used alternative is the Direct Strength Method (DSM), which will be introduced and explained during the course.
Following the theoretical part, the training moves to practical applications. These will start with the design of continuous, overlapped roof purlins, including the actual interaction between the connected roof sheeting and the purlin system.
The training will also address practical design questions that arise in everyday engineering practice, such as which orientation of Zed purlins is appropriate on an inclined roof slope, and how the orientation of tension-only purlin sag rods should be selected depending on the actual roof system and its structural behavior.
The training will then progress to the design of complete portal frame structures made exclusively from cold-formed sections.
The training will present several practical examples. All examples will be developed and solved using Consteel. The design approach is based on the Eurocode, but the training is also partially applicable to engineers working with other design standards and specifications.

details

Apply by: 11 November, 2026


important information

Next training date: 18 November, 2026
Training duration: 4 hours (10:00-15:00 CET)
Language: English
Location: Online, Microsoft Teams
Fee: from 108 € – see the pricing
Terms of Participation


WHO IS THIS TRAINING FOR?

The training is primarily intended for Consteel users, but the underlying structural mechanics and stability concepts are equally relevant to engineers working with other structural analysis software.

It is recommended that participants have a basic understanding of:
– The components and functions of primary and secondary framing
– Member and local buckling phenomena


During the training

  • No Consteel license is needed for the training.
  • The training will be demonstrated in Consteel, but no prior experience or installation is required to follow along.
  • However if you would like to try the advanced analysis and design methods and tools discussed in the training you can do it with a 30-day Trial version for free.

Get to Know Your Trainer

Bálint Vaszilievits-Sömjén phd

Senior Research Engineer

Bálint is a structural engineer currently serving as Head of the R&D Group at Consteel. He leads the development of new software features, coordinates research activities, and manages international collaboration with Consteel partners. With over nine years of experience in structural analysis and software development, Bálint brings deep expertise in the finite element method, Eurocode 3, and AISC 360 standards. 

Previously, he worked as Engineering Manager for Butler Europe and Astron Building Systems, leading major European pre-engineered metal building producers, which has given him solid knowledge of this market segment. 
He has participated in several international steel-oriented conferences and is a member of the ECCS TC8 Committee. 

REGISTration

By joining, you gain access to a valuable training program, or choose a full-year training pass that fits the way you learn.

EARLY BIRD

Available until

14 October, 2026 15:00 (CET)

Full price

144 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

126 144 €

VAT EXCLUDED / PERSON*

Premium

membership

108 144 €

VAT EXCLUDED / PERSON*

Register

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

NORMAL

Available until

11 November, 2026 15:00 (CET)

Full price

180 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

144 180 €

VAT EXCLUDED / PERSON*

Premium

membership

126 180 €

VAT EXCLUDED / PERSON*

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

Your training pass is here

Choose a training pass that fits how you learn, whether you need a few targeted sessions or unlimited access for a full year.

MINI PASS

Access to 3 trainings of your choice.
Valid for all trainings held in 2026.

Full price

360 540 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

288 432 €

VAT EXCLUDED / PERSON*

Premium

membership

252 378 €

VAT EXCLUDED / PERSON*

Get Mini Pass

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

UNLIMITED PASS

Unlimited access to all trainings.
Valid for all trainings held in 2026.

Full price

990 1880 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

792 1504 €

VAT EXCLUDED / PERSON*

Premium

membership

693 1316 €

VAT EXCLUDED / PERSON*

Get Unlimited Pass

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

FAQ

Cold-formed sections are commonly used as secondary structural members in modern steel – and, in some cases, reinforced concrete – industrial structures. However, their role can extend far beyond secondary framing: they can also contribute to the overall stability of the primary structure by providing resistance against lateral loads. In some applications, the entire load-bearing structure can even be designed using cold-formed sections. 

Due to their slenderness and thin-walled nature, cold-formed members are susceptible to several distinct stability phenomena. Their design therefore requires a different approach from that used for more traditional welded or hot-rolled sections, with particular attention to local, distortional, and global buckling, as well as their interaction. 

The training is primarily intended for Consteel users, but the underlying structural mechanics and stability concepts are equally relevant to engineers working with other structural analysis software. It is recommended that participants have a basic understanding of:
– The components and functions of primary and secondary framing 
– Member and local buckling phenomena 

You will need a device with Microsoft Teams to attend the training. Participants may have the opportunity to perform some smaller calculations during the sessions. For these calculations, a computer with Windows 11 and Consteel 19 installed is required. A trial license for Consteel can be requested prior to the training. 

– Date: 18 November, 2026 
– Duration: 4 hours (10:00-15:00 CET)
– Location: Online via Microsoft Teams 
– Language: English 

To join the training, you’ll need to: 

– Register before the application deadline (11 November, 2026) and complete payment.
– Have a stable internet connection and Microsoft Teams for online access.  

For further details, please read our Terms of Conditions. 

– No Consteel license is needed for the training.
– The training will be demonstrated in Consteel, but no prior experience or installation is required to follow along.
– However, if you would like to try the advanced analysis and design methods and tools discussed in the training, you can do it with a 30-day Trial version for free.

– The video of the training will be available for 1 month from the date of the training. 
– Participants will have access to example models from the training. 
– Opportunity to ask questions about the training via the Help Center for 30 days after the training.

Our training sessions are held live, but all registered and paid participants will receive the full recordings and training materials afterwards. You will also have the opportunity to send your questions to our engineering team via the Help Center, who will be happy to assist you.

Yes, we offer several discounts:

– Do you have Pro Membership? In this case you will receive a 20% discount on the price of the training. 
– For our Premium Membership users, we offer 40% discount on trainings. 

The discounted price tied to the membership is valid for as many participants as the company has memberships. For example, if the company has one Premium membership, one participant can register at the discounted price, while additional participants need to pay the full price.

Companies with the valid EU VAT number, no VAT is charged.
– For companies in the European Union (without the valid EU VAT number), 27% VAT is charged.
– For individuals within the European Union, VAT is charged at the applicable rate of the customer’s country of residence.
– For taxable persons established in a third country (i.e., outside the European Union), no VAT is charged.
– For private individuals residing in a third country (i.e., outside the European Union), no VAT is charged.

Our other Trainings

Project-Based Personalized Training

More trainings

Mūsų svetainė naudoja slapukus

Mes naudojame slapukus prisijungimo ir autentifikacijos funkcijoms užtikrinti bei tam, kad užtikrintume geriausią patirtį svetainėje consteelsoftware.com.

Sutinku