fbpx

Biblioteca de scripturi

Filtru
Filtrează după:
Rezultatul căutării:
Filtrul (filtrele) selectat(e):
  • Script Language
Filtru
Pro

Internal force result output from point to Excel

Outputs internal force results from a point to an Excel spreadsheet. After the start of the script run the user is asked to give a location for the point of interest, and select structural members to get the results from. After this, the requested results at the selected point are collected from ...

Excel
Output
Pro

Analysis + design run on critical load combinations

This script determines which load combinations are critical for an already modeled and loaded structure, then executes an analysis run and a design calculation with the given settings on only the critical load combinations. The analysis and design settings are set after the start of the script ru...

Pro

Tapered frame with results

The beginner users can efficiently use the script for model generation and optimization purposes, to get a sneak peek in structural parametric design. The advanced users can step by step explore its actual functioning and understand how the Grasshopper data structuring is solved, thanks to the de...

Load generation
Optimization
Output
Parametric
Structure creation
Pro

Critical load combination finder

Determines which load combinations are critical for an already modeled and loaded structure. At the end of the script run the critical load combinations are going to be selected within the analysis settings for further calculations. The script uses the load combinations that were already in the m...

Pro

Truss configurator – Advanced

According to eave height, truss span, roof slopes, rafter height and an approximate purlin spacing the script generates a truss on two columns using cross sections from the section bank, with node loads acting on it. The script is capable to generate more than 100 configuration for a specific spa...

Parametric
Structure creation
Basic

Truss configurator – Basic

According to truss span, divison and height the script generates a simple truss using cross sections from the section bank, with node loads acting on it. Current version: 2.0 (release date: 2022.08.04.)

Parametric
Structure creation
Pro

Truss, 6 points (K, KT, K2T, N)

This script creates a planar truss. The placement is defined by the 6 following points: top and bottom points of the left side, middle and right side of the truss. The available truss types are: K, K+T, K+2T and N. Other input parameters are: number of fields, material and sections, which can be ...

Parametric
Structure creation
Pro

Truss, 4 points (K, KT, K2T, N)

This script creates a planar truss. The placement is defined by the 4 end points of the top and the bottom cords of the truss. The cords are linear between the defined end points. The available truss types are: K, K+T, K+2T and N. Other input parameters are: number of fields, material and section...

Parametric
Structure creation
Basic

Truss, 2 points (K, KT, K2T, N)

This script creates a planar truss. The placement is defined by the 2 end points of the top cord of the truss. The top cord is linear between the 2 defined points, and the bottom cord is parallel with the top. The available truss types are: K, K+T, K+2T and N. Other input parameters are: height o...

Parametric
Structure creation
Pro

Space truss

This script creates a space truss. The placement is defined by 4 corner points on the top surface. The truss geometry is a double-layer, square-on-offset-square space grid. The input parameters are the number of fields in both directions, and the vertical structural height of the truss. Optionall...

Parametric
Structure creation
Pro

Simplified analysis + design run package

This script starts an analysis run and a design calculation consecutively for all load combinations. The following settings can be controlled from the input dialogue at the start of the script run: - 1st or 2nd order analysis - Consideration of stability - Number of requested buckling shap...

Basic

Wind load on monopitch canopy roof EC1-1-4 7.3

This script calculates and applies wind surface load according to EC1-1-4 7.3 on monopitch canopy roofs. The calculation is done separately in an Excel spreadsheet. The Excel spreadsheet calculates the load intensities based on manually given input data. The results are read by Descript, which ap...

Excel
Load generation
Pro

Section optimization CHS

This script tries to find an optimal section for an already existing and loaded structure. This version focuses only on CHS sections. The list of available section sizes are read from an Excel spreadsheet, which can be modified. Algorithm: - List all members that currently have CHS sections. ...

Excel
Optimization
Basic

Simplified analysis + design run package (basic)

This script starts an analysis run and a design calculation consecutively for all load combinations. There are 2 options to choose from with the help of a dialogue at the start of the script: - First order analysis + cross-section design - Buckling analysis + buckling design Current versi...

Basic

Result output to Excel (IPE members)

This script collects and writes results into an Excel spreadsheet. Various model information and results are collected for output about members with IPE section type. Collected data: member name, section name, member length [mm], member utilization [%], My,min [kNm], My,max [kNm], N,min [kN], N,...

Excel
Output
Basic

Haunched frame

This script creates a haunched frame. The frame dimensions, haunch sizes, sections and load intensity are changeable initial parameters. Line loads are applied to the rafters of the frame. A load combination is also created with the applied load. Analysis and design can be run right away, after s...

Parametric
Structure creation
Basic

Continuous multispan beam

This script creates a continuous beam with multiple spans. The number and length of spans, load intensities and section parameters are changeable initial parameters. Line loads are applied to the beam. A load combination is also created with the applied load. Analysis and design can be run right ...

Parametric
Structure creation
Basic

Simple cantilever beam

This script creates a simple cantilever beam. There is a fixed support on one end, and a single point load on the other. The cantilever length, section parameters and the load intensity are changeable initial parameters. A load combination is also created with the applied load. Analysis and desig...

Parametric
Structure creation
Basic

Main frame tapered duopitch

This script creates a tapered main frame for a building with a duopitch roof. Input parameters such as insertion point, frame dimensions, material, sections and support positions can be set through input dialogues after the start of the script run. Current version: 1.0 (release date: 2021.11.0...

Parametric
Structure creation
Basic

Main frame tapered monopitch

This script creates a tapered main frame for a building with a monopitch roof. Input parameters such as insertion point, frame dimensions, material, sections and support positions can be set through input dialogues after the start of the script run. Current version: 1.0 (release date: 2021.11....

Parametric
Structure creation
Basic

Main frame haunched duopitch

This script creates a haunched main frame for a building with a duopitch roof. Input parameters such as insertion point, frame dimensions, material, sections and support positions can be set through input dialogues after the start of the script run. Current version: 1.0 (release date: 2021.11....

Parametric
Structure creation
Basic

Main frame haunched monopitch

This script creates a haunched main frame for a building with a monopitch roof. Input parameters such as insertion point, frame dimensions, material, sections and support positions can be set through input dialogues after the start of the script run. Current version: 1.0 (release date: 2021.10...

Parametric
Structure creation
Basic

Gable wall duopitch

This script creates a gable wall for a building with a duopitch roof. Input parameters such as insertion point, wall dimensions, number of bays, material, sections and support positions can be set through input dialogues after the start of the script run. Current version: 1.0 (release date: 20...

Parametric
Structure creation
Basic

Gable wall monopitch

This script creates a gable wall for a building with a monopitch roof. Input parameters such as insertion point, wall dimensions, number of bays, material, sections and support positions can be set through input dialogues after the start of the script run. Current version: 1.0 (release date: 2...

Parametric
Structure creation
Basic

Laced column

Creates a laced column built up from beam elements and links. Parameters such as the insertion point, column dimensions, section sizes, support conditions etc. can be controlled through input dialogues after the start of the script. Current version: 1.0 (release date: 2021.10.27.) To

Parametric
Structure creation
Pro

Silo

Be aware that the script DELETES ALL previous content in the currently opened model file. This script creates a silo from steel plate elements and also a support structure for the silo from beam elements. Additionally, surface loads are also applied to the inside of the silo surface representing...

Parametric
Shell element
Structure creation
Basic

Battened column

Creates a battened column built up from beam elements. Parameters such as the insertion point, column dimensions, section sizes, support conditions etc. can be controlled through input dialogues after the start of the script. Current version: 1.0 (release date: 2021.10.26.) To DOWNL...

Parametric
Structure creation
Pro

Purlin generator

Creates purlins onto a rectangular area. The script is designed for the generation of purlins onto the roof of a warehouse building with multiple frames. The purlins are connected to the substructure with links. The definition of the plane of the roof, number of the frames, section of the purlins...

Parametric
Pro

Bracing, 4 points

This script creates bracing for a quadrilateral area based on 4 points. The bracing consists of crossing tension bars with optional struts in between and at both ends. The number of bracing fields and other parameters can be controlled through an input dialogue after the start of the script. C...

Parametric
Basic

Bracing, 3 points

This script creates bracing for a rectangular area based on 3 points. The bracing consists of crossing tension bars with optional struts in between and at both ends. The number of bracing fields and other parameters can be controlled through an input dialogue after the start of the script. Cur...

Parametric
Basic

3D hall with tapered frames

This script creates a 3D hall with tapered frames built up from welded I sections. Additionally, load transfer surfaces for the frames, roof and wall purlins, supports and some loads are also created. The main input parameters can be controlled through an input dialogue after the start of the scr...

Parametric
Basic

Frame from plate elements, box + diagonal corner type

This script creates a frame built up from steel plate elements with box corner type and additional diagonal plate. Changeable input parameters: span, column height, roof angle, section sizes, ridge connection plate thickness, FE size. Current version: 1.0 (release date: 2021.10.25.) To

Shell element
Basic

Frame from plate elements, diagonal corner type

This script creates a frame built up from steel plate elements with diagonal corner type. Changeable input parameters: span, column height, roof angle, section sizes, ridge connection plate thickness, FE size. Current version: 1.0 (release date: 2021.10.25.) To DOWNLOAD thi...

Shell element
Basic

Frame from plate elements, box corner type

This script creates a frame built up from steel plate elements with box corner type. Changeable input parameters: span, column height, roof angle, section sizes, ridge connection plate thickness, FE size. Current version: 1.0 (release date: 2021.10.25.) To DOWNLOAD this scr...

Shell element
Pro

Section optimization IPE

This script tries to find an optimal section for an already existing and loaded structure. This version focuses only on IPE sections. The list of available section sizes are read from an Excel spreadsheet, which can be modified. Algorithm: - List all members that currently have IPE sections. ...

Excel
Optimization
Pro

Section optimization HEA

This script tries to find an optimal section for an already existing and loaded structure. This version focuses only on HEA sections. The list of available section sizes are read from an Excel spreadsheet, which can be modified. Algorithm: - List all members that currently have HEA sections. ...

Excel
Optimization
Basic

Section optimization SHS

This script tries to find an optimal section for an already existing and loaded structure. This version focuses only on SHS sections. The list of available section sizes are read from an Excel spreadsheet, which can be modified. Algorithm: - List all members that currently have SHS sections. ...

Excel
Optimization
Basic

2D Frame + supports

This script creates a 2D frame with clamped column bases and out-of-plane rafter supports. Span, column height, roof top height and purlin distances can be controlled through an input dialogue after starting the script. Current version: 1.0 (release date: 2021.10.21.) To DOWNLOAD

Parametric
Structure creation
Pro

Warehouse creation type 3: truss

This script creates an entire warehouse building with trusses in the main frames. Parameters of the building can be controlled through an Excel spreadsheet. The created model includes the primary load bearing structure, roof and wall purlins, supports, a bracing system, load transfer surfaces and...

Excel
Parametric
Structure creation
Pro

Warehouse creation type 2: tapered + truss

This script creates an entire warehouse building with tapered columns and truss rafters in the main frames. Parameters of the building can be controlled through an Excel spreadsheet. The created model includes the primary load bearing structure, roof and wall purlins, supports, a bracing system, ...

Excel
Parametric
Structure creation
Pro

Warehouse creation type 1: tapered

This script creates an entire warehouse building with tapered main frames. Parameters of the building can be controlled through an Excel spreadsheet. The created model includes the primary load bearing structure, roof and wall purlins, supports, a bracing system, load transfer surfaces and some l...

Excel
Parametric
Structure creation
Basic

Simple column creation

This script creates a pinned-pinned 3 meter high column. The section is HEA 200. A point load is also applied. Analysis can be run right away. Current version: 1.0 (release date: 2021.10.20.) To DOWNLOAD this script, navigate to the MyDescript interface within Consteel, the...

Structure creation
Pro

Snow accumulation load EC1-1-3 5.3.6

This script calculates and applies snow accumulation surface load according to EC1-1-3 5.3.6. The calculation is done separately in an Excel spreadsheet. The necessary measurements are done on the model through an input dialogue after the start of the script run. Data is then read out to the Exce...

Excel
Load generation
Basic

Simple beam creation

This script creates a simply supported beam with a 6 m span. The section is welded I. A line load is also applied. Analysis can be run right away. Current version: 1.0 (release date: 2021.10.19.) To DOWNLOAD this script, navigate to the MyDescript interface within Consteel,...

Structure creation