Design of frames composed of tapered members according to EN 1993 using Consteel program (full access)

  • Contents

The portal frames composed of tapered welded I-shaped structural members play important roles in the industrial buildings. The application of the relatively thin plates and the optimized fabrication makes these structures being competitive against the light truss structures at least in the range of 24–36 meters span. Competition has resulted in lesser selfweights using thin plated slender cross-sections, which are sensitive to local buckling. However, the development of structures concerning local buckling was delayed in Hungary by the conservative specifications of the MSz 15024 standard. The application of the new EN 1993 standard may cause radical development in the design of tapered structural elements with relatively thin plates. This paper introduces the methods as well as the advantages of the new design methodology.

Clich the button below to download and read the full article. The article is in hungarian at page 42-55.

Download article

Papp F. Változó gerincmagasságú keretszerkezet tervezése az EN 1993 szabvány szerint a ConSteel programmal. MAGÉSZ ACÉLSZERKEZETEK II:(3) pp. 40-53. (2005)

Buckling design
Structural member
EN 1993-1-1
EN 1993-1-5
Technical reports
General Method
Portal frames
Tapered members