As it is important to have a clear overview of the structural model, the visualization of the analysis results is also essential when it comes to effective design process. From Consteel 15 we use an advanced method for deformation representation which makes it smooth and realistic.
Civil engineering software in general use the traditional beam-type deformation representation where the section is shown on the deformation of the reference line. There are some consequences of this representation mode that can be disturbing for the users. The best example is an eccentric support, where the deformed shape is visualized as if the supported point would’ve moved. The reference line indeed moved but the supported point not – the representation can not show that.
With Consteel’s advanced deformation representation not only the position of the reference line points are calculated and the section is only shown automatically, but the positions of all the decorated points of the section are calculated during a post-process and so it is possible to represent the real deformations. As a consequence it is also visible that the supported points stay in position.
Coloring has also improved with this representation. With the traditional way, the section was colored based on only the deformations of the reference line, so the same color applied for the whole cross-section. With the advanced technique, colors are assigned to the decorated points, and so coloring can change within a cross-section.
It is important to know that the analysis results are the same as before, only the representation of the deformations are now more realistic.
Other issues connecting to visualization which were often raised by our customers are also fixed with this advanced representation method, e.g. at frame corners the connecting flanges are moving together as in reality. Warping at member ends can also be well inspected.
To see examples of what Consteel’s advanced deformation representation can give you, check out our feature preview video: