fbpx
HU
Belépés

CLIMATIC AND SEISMIC ACTION DEFINITION WITH CONSTEEL 

Wind, snow, and seismic loads are among the most error-prone parts of structural modeling, small mistakes in load case setup, direction consideration, or standard parameter evaluation can quietly undermine an otherwise correct design. This training shows how to define these actions in Consteel following standard Eurocode-based procedures (EN 1991-1-3, EN 1991-1-4, EN 1998-1) and combine them correctly. It also gives a first look at CFD-based wind load simulation with the FALCON plugin.

Registration
Details

WHAT WILL YOU LEARN?

How to generate snow load cases in Consteel per EN 1991-1-3 for different roof shapes, directly from Eurocode parameters
How to define wind loads for multiple directions per EN 1991-1-4 for different roof shapes
How to define masses and apply seismic actions per EN 1998-1, and integrate them as load cases
Explore the different calculation methods to apply the seismic effects,d such as the CQC summation of all modes, the linear summation of selected modes, or the consideration of a single dominant mode
How Consteel builds ultimate and serviceability combinations from climatic and seismic load cases according to EN 1990’s combination rules, including relevant partial and combination factors
A first look at CFD-based wind load simulation with the FALCON plugin, and how it compares to standard-based wind loads for non-standard geometries

details

Apply by: 30 October, 2026


important information

Next training date: 7 October, 2026
Training duration: 4 hours (10:00-15:00)
Language: English
Location: Online, Microsoft Teams
Fee: from 108 € – see the pricing
Terms of Participation


WHO IS THIS TRAINING FOR?

This training is designed for structural engineers who are familiar with the fundamental principles of standard-based load evaluation. 


PARTICIPANTS MUST HAVE

Consteel

An active Consteel license and version 19 installed.

Not a Consteel user yet?

Don’t worry, you can participate in our training with a 30-day Trial version for free. 

Get to Know Your Trainer

Ádám Kis 

Development Engineer 

As a structural engineer, he developed a strong passion for parametric design methods and had the opportunity to work on several intriguing projects. Throughout this time, he encountered the common challenge of evaluating wind loads on complex, non-standard buildings. This experience sparked his interest in computational fluid dynamics (CFD) and its application in structural engineering, which led to a shift toward research and later became the focus of his PhD studies. 
 
He now works as a developer on Pangolin and FALCON, where he combines engineering insight with advanced computational tools to push the boundaries of structural design. 

REGISTration

By joining, you gain access to a valuable training program, or choose a full-year training pass that fits the way you learn.

EARLY BIRD

Available until

9 October, 2026 15:00 (CET)

Full price

144 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

126 144 €

VAT EXCLUDED / PERSON*

Premium

membership

108 144 €

VAT EXCLUDED / PERSON*

Register

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

NORMAL

Available until

30 October, 2026 15:00 (CET)

Full price

180 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

144 180 €

VAT EXCLUDED / PERSON*

Premium

membership

126 180 €

VAT EXCLUDED / PERSON*

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

Your training pass is here

Choose a training pass that fits how you learn, whether you need a few targeted sessions or unlimited access for a full year.

MINI PASS

Access to 3 trainings of your choice.
Valid for all trainings held in 2026.

Full price

360 540 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

288 432 €

VAT EXCLUDED / PERSON*

Premium

membership

252 378 €

VAT EXCLUDED / PERSON*

Get Mini Pass

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

UNLIMITED PASS

Unlimited access to all trainings.
Valid for all trainings held in 2026.

Full price

990 1880 €

VAT EXCLUDED / PERSON*

FOR CONSTEEL USERS**

Pro

membership

792 1504 €

VAT EXCLUDED / PERSON*

Premium

membership

693 1316 €

VAT EXCLUDED / PERSON*

Get Unlimited Pass

* VAT is calculated based on the legislation in force
** Only for users with an active monthly or yearly subscription plan

FAQ

This training guides you through the climatic and seismic action definition in Consteel. The training will cover: 

– How to generate snow load cases in Consteel per EN 1991-1-3 for different roof shapes, directly from Eurocode parameters
– How to define wind loads for multiple directions per EN 1991-1-4 for different roof shapes
– How to define masses and apply seismic actions per EN 1998-1, and integrate them as load cases
– Explore the different calculation methods to apply the seismic effects, such as the CQC summation of all modes, the linear summation of selected modes, or the consideration of a single dominant mode
– How Consteel builds ultimate and serviceability combinations from climatic and seismic load cases according to EN 1990’s combination rules, including relevant partial and combination factors
– A first look at CFD-based wind load simulation with the FALCON plugin, and how it compares to standard-based wind loads for non-standard geometries

This training is designed for structural engineers who are familiar with the fundamental principles of standard-based load evaluation. No prior experience with simulations or Consteel is required. 

You will need a computer with Windows 11 operating system to complete the training. Participants also must have: 

– An active Consteel license with Consteel 19 installed. If you don’t have an active license yet, you can participate in our training with a 30-day Trial version for free.  

– Date: 7 October, 2026
– Duration: 4 hours (10:00-15:00 CET)
– Location: Online via Microsoft Teams 
– Language: English 

To join the training, you’ll need to: 

– Register and complete payment before the application deadline (30 October, 2026). 
– Ensure you have the required software installed (Consteel 19). 
– Have a stable internet connection and Microsoft Teams for online access.  

For further details, please read our Terms of Conditions. 

If you don’t have an active Consteel license, you can request a 30-day Trial version for free from our website.

– The video of the training will be available for 1 month from the date of the training. 
– Participants will have access to example models from the training. 
– Opportunity to ask questions about the training via the Help Center for 30 days after the training.

Our training sessions are held live, but all registered and paid participants will receive the full recordings and training materials afterwards. You will also have the opportunity to send your questions to our engineering team, who will be happy to assist you.

Yes, we offer several discounts: 

– Do you have Pro Membership? In this case you will receive a 20% discount on the price of the training.  
– For our Premium Membership users, we offer 40% discount on trainings.

The discounted price tied to the membership is valid for as many participants as the company has memberships. For example, if the company has one Premium membership, one participant can register at the discounted price, while additional participants need to pay the full price.
 

Companies with the valid EU VAT number, no VAT is charged.
– For companies in the European Union (without the valid EU VAT number), 27% VAT is charged.
– For individuals within the European Union, VAT is charged at the applicable rate of the customer’s country of residence.
– For taxable persons established in a third country (i.e., outside the European Union), no VAT is charged.
– For private individuals residing in a third country (i.e., outside the European Union), no VAT is charged.

Our other Trainings

Project-Based Personalized Training

More trainings

Weboldalunkon sütiket (cookie) használunk

A bejelentkezés és a hitelesítés működéséhez sütiket (cookie) használunk, valamint annak biztosítására, hogy a lehető legjobb felhasználói élményt kapd a consteelsoftware.com oldalon.

Elfogadom